|
|
Post by konga9 on Jan 9, 2009 8:25:03 GMT -5
Thanks for the info.
I just have a couple more questions though.
I was thinking about putting that same tank on my bike,but I wasn't sure how it would look. You answered that question for me. Thank you.
I was concerned about the depth of the tunnel, but yours looks fine.
Did you have to modify the tank at all?
And my last question,for now.
What brand of tires are you running?
Thanks
|
|
nonic
New Member
Posts: 37
|
Post by nonic on Jan 9, 2009 21:22:20 GMT -5
The tank worked out pretty easy, only advise is make sure you mount the tank high enough to get the wiring under it. The tires are Ching Shing (Marquis). If you have an more question just let me know.
Thanks
|
|
|
|
Post by konga9 on Jan 13, 2009 13:30:08 GMT -5
Hello nonic,
I had another question about the tank.
Do you remember which model tank you bought?
I've seen them in the Custom Chrome catalog listed like this:
#600155 - Fits Evo Softails
#600157 - Fits Twin Cam 88 Softails
#600154 - Fits Sportsters
I'm not familiar with the mounting of each and was hoping you could tell me which one you started with.
I thought you probably had to modify the mounting a bit, but if you remembered which one you started with it might make it a little easier for me.
Thanks again
|
|
nonic
New Member
Posts: 37
|
Post by nonic on Jan 22, 2009 21:48:58 GMT -5
|
|
nonic
New Member
Posts: 37
|
Post by nonic on Feb 7, 2009 21:43:11 GMT -5
Here's an updated pictures of my son on DBLE TROUBLE. This was taken at an old parts store out in West Texas.  |
|
|
|
Post by konga9 on Mar 4, 2009 10:57:09 GMT -5
Did you ever find anymore information on where your rear fender came from?
I trying to find a rear fender and I'm looking for all the info I can get.
Thanks
|
|
nonic
New Member
Posts: 37
|
Post by nonic on Mar 5, 2009 21:13:23 GMT -5
Here is what I have on the rear fender, which I'm pretty sure I got it off ebay. All I have is the email address. scrapemetalart@yahoo.com. Spec on the fender is rib 1" wide & the fender is 5 1/4" wide 29" long. Hope this helps.
|
|
|
|
Post by drooling-bloodhound on Mar 5, 2009 21:34:00 GMT -5
|
|
|
|
Post by nuklhed on Mar 23, 2009 20:10:55 GMT -5
Have you had any trouble with the foot pegs moving on ya? Can you stand up on them? It seems if ya put to much weight on them they would just spin down on the frame.
|
|
nonic
New Member
Posts: 37
|
Post by nonic on Mar 23, 2009 21:43:18 GMT -5
Actually that work pretty good. But I did end up change them out do to the fact when you used the kick starter it would hit the pegs. So I fabed up some that bolted to the frame and out of the way of the kick starter.
|
|
|
|
Post by nuklhed on Mar 24, 2009 17:14:43 GMT -5
No rush, but if ya get a chance could ya snap a couple pics? I'm tryin to work out some mids on my project now and between the kicker and motor mount I'm drawin a blank
|
|
|
|
Post by metalfingers on Mar 27, 2009 16:55:11 GMT -5
looks good, all clean and purdy
|
|
nonic
New Member
Posts: 37
|
Post by nonic on Apr 1, 2009 20:05:24 GMT -5
Sorry, but the bike has been sold and I didn't get any pictures of the mid controls.
|
|
|
|
Post by metalfingers on Apr 5, 2009 21:00:21 GMT -5
Sorry, but the bike has been sold and I didn't get any pictures of the mid controls. April fools right??? haha Congrats on selling it ... I guess,... whether you wanted to or not |
|
|
|
Post by konga9 on Jun 24, 2009 14:13:34 GMT -5
It's been awhile since I last posted to you.
Slowly but surely I'm moving forward with my project.
Could you tell me what petcock you used on the tank?
It would be most helpful.
|
|
