I drove west from Pickerington, OH on 256 then 13 S to 22 W to South Zanesville. Then 555 S. to 32 N to 33 W back to pickerington. I read about OH - 555 online and heard it was a great ride. I am here to affirm these claims. It was a lot of elevation change and switchbacks with gravel, some wet spots and great banked turns. I had a great time, the bike did well but there are a few things that need replaced.
Changed the oil right before I left. 200 miles and quite clear smells new. engine ran flawlessly. just leaks at the clutch rod seal. i reaplaced it and the bushing but it started leaking soon after again.
The gas tank leaked when my dad knocked the bike over loading it on a truck. I also got hit by a huge rock on my way to school one day. it hit the tank bounced off then took out my right mirror before whizzing past my visor over my shoulder.
The xs vibrations caused my plate to be slowly sawn through. Had cops ride behind me with the plate like this multiple times and never had any problems. Probably wont fix it.
Last Edit: Oct 10, 2009 19:12:03 GMT -5 by boseph007
I cut a piece of steel plate about .065 thick, the same size as the license plate. Drilled holes to match the plate and bolted it between the plate and bracket, with bolts in the bottom holes. This keeps the license plate from vibrating and cracking around the mount bolts.
75 XS650B with 79 forks and dual disc, braided lines, disc brake on back, Pamco ignition, Pamcopete's reg/rec mods, kill switch relay, home made harness, all LED turn, brake and tail lights, tapered head bearings, bronze bushes in swing arm, soon to get shock and fork upgrades
r80rt: :)This is a splendid write up, THANK YOU!!!!
Dec 26, 2015 16:54:05 GMT -5
mashermoto: What the what is this shoutbox for? Or should I shout, WHAT THE WHAT IS THIS SHOUTBOX FOR!
May 12, 2016 22:22:21 GMT -5
motormike: Good Day ...just a FYI.. Wild Cat is this Labor Day weekend. Still go'n on. A few 650's still make the scene. Various rides at different skill levels each day.. awards dinner sunday eve. BS in the park'n lot after dinner.
Aug 23, 2016 7:57:01 GMT -5
lsettle: First post in over 6 years!
Aug 28, 2016 19:45:17 GMT -5
kardon: Wow quiet here, where did they all go.
Oct 7, 2016 2:18:13 GMT -5
gggGary: XS650.com LOL
Feb 16, 2017 20:49:02 GMT -5
buell88: Anybody have any idea who built the xs650 tracker used in the Draggin Jeans Ad on Pipeburn?
May 16, 2017 16:24:09 GMT -5
joshua: The regulator/rectifier unit I got from Mikes PMA has closer hole spacing than original. Are we supposed to mill the holes to fit?
Jun 7, 2017 19:25:58 GMT -5
joshua: My bad. I found the bracket they supplied to mount the rectifier/regulator... Uh oh. How is this meant to work? Which way is it meant to mount? Looks like I have to use some spacers or something. Good instructions would be nice.
Jun 7, 2017 22:09:52 GMT -5
craig8johnson: Not sure if this is the right spot or not but oh well...
Jul 11, 2017 18:04:15 GMT -5
craig8johnson: I'm checking the charging system. I'm afraid I might have fried the last battery. With the solid state regulator (after market) what should it be charging at. The book says, I think, 15 volts. I'm hitting 17 when revved. Is that too high?
Jul 11, 2017 18:06:19 GMT -5
gggGary: Yes 17 volts is too high, about 14 volts is max, sounds like you don't have the right regulator or it's wired wrong.
Jul 13, 2017 6:54:33 GMT -5
dean: Just saying Hello, new member who is going to fix up a 79 XS650 that has seen its better days. I will definitely have lots of questions coming up.
Jun 23, 2018 16:45:32 GMT -5
tt650: Trying to breathe life into a 1980 that's been stored (indoors) for 25 yrs. Air filters are dry rotted. Have cleaned carbs but she only runs briefly on choke then stops. Need jet setting info and other ideas that might help her idle and rev.
Jul 3, 2018 19:15:19 GMT -5
trix13: Hey everyone! New to the forum and am fighting those gremlins!! New charging system, ignition switch, coil and fuse box. Resistance is higher than normal on the ignition pick up so I'm trying to find one. No such luck yet.
Aug 16, 2018 8:50:48 GMT -5
trix13: Also, even though all of my connections are clean, I cannot seem to find out why , when at higher rpms, I hit the signals and the rpms pulse with the signals...hahah. same with the brake light. I appreciate all input!!
Aug 16, 2018 8:55:08 GMT -5
bob99: how do I post a question. I am new to the forum
Jun 6, 2019 10:52:10 GMT -5
adlpc: Hello all! Been enjoying your edifying posts and discussions - and as a fan of the XS650 since my early teenage years happy that I now own a 1980 Special which I plan to turn into a vintage half faired racer. Thank you all for being here!
Oct 1, 2019 0:58:56 GMT -5