I tried that, worked ok for about a couple hundred miles. Ran it for almost a thousand. Rattled like a coffe can full of nuts. They are the right pitch and width, but not enough tensile strength.
75 XS650B with 79 forks and dual disc, braided lines, disc brake on back, Pamco ignition, Pamcopete's reg/rec mods, kill switch relay, home made harness, all LED turn, brake and tail lights, tapered head bearings, bronze bushes in swing arm, soon to get shock and fork upgrades
I have a friend who did this, at the end of a trip, after he'd run about 500 miles, the chain snapped, locked his rear wheel and laid the bike down, which slid under his buddys bike bringing him off. The result killed his girlfriend passenger, his buddy and his wife who were on the other bike, after 2 months of surgery when my friend came out of hospital he was tried for manslaughter because he was using non-homologated chain. This was 40 years ago but he never got over it. Bigjimmy, I think rather than save a few bucks it's better to play safe and buy the real thing.
I have a EK 530 MVXZ QUADRA-X RING chain on my bobber. After a few thousand miles from install, it's probably scratched a millimeter, hardly at all.... Yeah, that included the break-in too, where any chain is expected to stretch a bit within the first few miles. Dam good chain! I paid about $100 for it, and it's well worth it, I don't expect to change it for several years.
Fix em, ride em, maken em better. Loven these old school twins.
You can get cheap motorcycle specific chain. When I brought my 650 back to life several years ago, I didn't know how well or even if it would run. I tried to save money in some areas and the chain was one of them. I got a $20 J.C.Whitney chain, the heavy duty one not the standard (those cost even less). I've got 8 or 9K on it now and it appears to be about half stretched out. I'm more than satisfied with that for $20.
I'm sure proper maintenance goes a long way towards this, though. I keep the chain adjusted and well lubed with the best chain lube I've found - Kal Guard Chain Kote. In 40+ years of riding, this is the best stuff I've ever used and, believe me, I've tried quite a few. The absolute worst I ever tried was that "Chain Wax" crap. It just coats the outside and doesn't penetrate or lube the inner parts. That may be fine on an o-ring chain that has it's own lube sealed inside but it's no good on a regular old style chain.
r80rt: :)This is a splendid write up, THANK YOU!!!!
Dec 26, 2015 16:54:05 GMT -5
mashermoto: What the what is this shoutbox for? Or should I shout, WHAT THE WHAT IS THIS SHOUTBOX FOR!
May 12, 2016 22:22:21 GMT -5
motormike: Good Day ...just a FYI.. Wild Cat is this Labor Day weekend. Still go'n on. A few 650's still make the scene. Various rides at different skill levels each day.. awards dinner sunday eve. BS in the park'n lot after dinner.
Aug 23, 2016 7:57:01 GMT -5
lsettle: First post in over 6 years!
Aug 28, 2016 19:45:17 GMT -5
kardon: Wow quiet here, where did they all go.
Oct 7, 2016 2:18:13 GMT -5
gggGary: XS650.com LOL
Feb 16, 2017 20:49:02 GMT -5
buell88: Anybody have any idea who built the xs650 tracker used in the Draggin Jeans Ad on Pipeburn?
May 16, 2017 16:24:09 GMT -5
joshua: The regulator/rectifier unit I got from Mikes PMA has closer hole spacing than original. Are we supposed to mill the holes to fit?
Jun 7, 2017 19:25:58 GMT -5
joshua: My bad. I found the bracket they supplied to mount the rectifier/regulator... Uh oh. How is this meant to work? Which way is it meant to mount? Looks like I have to use some spacers or something. Good instructions would be nice.
Jun 7, 2017 22:09:52 GMT -5
craig8johnson: Not sure if this is the right spot or not but oh well...
Jul 11, 2017 18:04:15 GMT -5
craig8johnson: I'm checking the charging system. I'm afraid I might have fried the last battery. With the solid state regulator (after market) what should it be charging at. The book says, I think, 15 volts. I'm hitting 17 when revved. Is that too high?
Jul 11, 2017 18:06:19 GMT -5
gggGary: Yes 17 volts is too high, about 14 volts is max, sounds like you don't have the right regulator or it's wired wrong.
Jul 13, 2017 6:54:33 GMT -5
dean: Just saying Hello, new member who is going to fix up a 79 XS650 that has seen its better days. I will definitely have lots of questions coming up.
Jun 23, 2018 16:45:32 GMT -5
tt650: Trying to breathe life into a 1980 that's been stored (indoors) for 25 yrs. Air filters are dry rotted. Have cleaned carbs but she only runs briefly on choke then stops. Need jet setting info and other ideas that might help her idle and rev.
Jul 3, 2018 19:15:19 GMT -5
trix13: Hey everyone! New to the forum and am fighting those gremlins!! New charging system, ignition switch, coil and fuse box. Resistance is higher than normal on the ignition pick up so I'm trying to find one. No such luck yet.
Aug 16, 2018 8:50:48 GMT -5
trix13: Also, even though all of my connections are clean, I cannot seem to find out why , when at higher rpms, I hit the signals and the rpms pulse with the signals...hahah. same with the brake light. I appreciate all input!!
Aug 16, 2018 8:55:08 GMT -5
bob99: how do I post a question. I am new to the forum
Jun 6, 2019 10:52:10 GMT -5
adlpc: Hello all! Been enjoying your edifying posts and discussions - and as a fan of the XS650 since my early teenage years happy that I now own a 1980 Special which I plan to turn into a vintage half faired racer. Thank you all for being here!
Oct 1, 2019 0:58:56 GMT -5
jimothyj: Hello everyone, I just joined & wish would have known about this site in 2014 when I brought my 1974 TX650A back from the grave. I have spent a good deal of $$ and alot of time on it. Just painted it and working on electrical, I will post pics soon,
Apr 10, 2021 2:14:13 GMT -5
louisvan: trix13 - I had a problem with my 1975 SX650. When I got to highway speeds, the engine lost power. The problem was in the connectors. At a certain vibration and the wind pushing on the wiring loom, the connector lost continuity. A bad crimp to the wire.
May 20, 2021 1:19:09 GMT -5