|
|
Post by ignition on Sept 24, 2005 11:31:23 GMT -5
Whats the best way to take this thing out of the system? All it does is turn you brights on when your headlight dies right?? Ive heard mention of its removal on the site, but couldnt find the specifics. Thanks in advance.
|
|
rod
Full Member
77 XS 650 , 81 XS 650 Special
Posts: 232
|
Post by rod on Sept 24, 2005 21:39:35 GMT -5
|
|
|
|
Post by 82bobber on May 14, 2006 10:22:25 GMT -5
Hey Rod, I'm trying to bypass the reserve lighting, read the link and it says to connect the blue/black to blue/yellow to bypass, the new wiring harness I got from Mikes only has yellow, yellow/red/, blue, dgreen, blue/yellow & black any Ideas? Thanks
|
|
|
|
Post by 50gary on Jun 6, 2006 16:59:12 GMT -5
Thanks I just did the same thing to my XS11 it has the same RLD and same coloured wiring so it should work.
Cheers, 50gary
|
|
|
|
Post by johnb81650 on Jul 2, 2006 20:19:45 GMT -5
i followed instructions for removal and it works like a charm...go for it guys!!!!!!!!!!!!!!
|
|
hopper
Junior Member
Posts: 87
|
Post by hopper on Jul 16, 2006 20:36:35 GMT -5
I'm assuming there is no harm in leaving the old plug there. I might trace the wires all the way back and take it entirely out of the harness to clean it up better if the plug doesn't need to be used any more.
Hopper
|
|
|
|
Post by ignition on Jul 22, 2006 10:43:49 GMT -5
i ended up cutting it off and wrapping all of the wires individually just so they don't make contact with anything.
s!
|
|
|
|
Post by jtd650 on Aug 12, 2006 19:41:01 GMT -5
Just as I thought ... I can go to "the garage" and get the answer. Thanks guys, for "being there".
|
|
