garthh
Full Member
If it don't work, figure out something that do!!!
Posts: 111
|
Post by garthh on Jul 4, 2005 2:05:22 GMT -5
    the stand is just a simple wood construction now the bike is @ good hight to work on it the ramp is bowling alley wood [ maple strips screw nailed together] painted w/grit. I used it for 20yrs to put assorted bikes in the back of pickups 2yrs. ago when I re installed the motor, I used some tye downs & the eyebolts in the ceiling to swing the motor into the frame Garthh |
|
|
|
Post by 50gary on Jul 4, 2005 21:16:44 GMT -5
I like it! I made my work stand from an old weight lifting bench. Someone threw it out and I welded on it until it worked. I'm frugal. That's true recycling.
Cheers, 50gary
|
|
|
|
Post by gdjohnson on Jul 4, 2005 23:26:33 GMT -5
That's a good idea.
Greg
|
|
garthh
Full Member
If it don't work, figure out something that do!!!
Posts: 111
|
Post by garthh on Jul 6, 2005 1:18:34 GMT -5
My back is old & my knees ache
so you just have to make the work [fun] comfortable
Garthh
|
|
